manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz R&S FSV Скачать руководство пользователя страница 89

Preparing for Use

R&S

®

 FSVA/FSV

66

Quick Start Guide 1321.3066.02 ─ 05

7. Select the "Properties" button.

8. On the "General" tab, select "Use the following DNS server addresses" and

enter your own DNS addresses.

For more information, refer to the Windows Help.

3.6.3

Using Computer Names

In a LAN that uses a DNS server (Domain Name System server), each PC or
instrument connected in the LAN can be accessed via an unambiguous computer
name instead of the IP address. The DNS server translates the host name to the
IP address. This is especially useful when a DHCP server is used, as a new IP
address may be assigned each time the instrument is restarted.

Each instrument is delivered with an assigned computer name, but this name can
be changed.

The default instrument name is a non-case-sensitive string with the following syn-
tax:

<Type><variant>-<serial_number>

 

Setting Up a Network (LAN) Connection

Содержание R&S FSV



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды