manualshive.com logo in svg

Rohde & Schwarz R&S FSV, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz R&S FSV Скачать руководство пользователя страница 205

Appendix: LAN Interface

R&S

®

 FSVA/FSV

182

Quick Start Guide 1321.3066.02 ─ 05

Restoring the connection to the R&S

 

FSVA/FSV

Follow the instructions above for setting up a connection to the R&S

 

FSVA/FSV.

If the connection is terminated and then restored, the R&S

 

FSVA/FSV remains in

the same state.

8.5

Deactivating the R&S

 

FSVA/FSV via Remote

Operation

1. Click the R&S

 

FSVA/FSV soft front panel and close the application with the

key combination ALT + F4.

2. Click the desktop and press the key combination ALT + F4.

A safety query is displayed to warn you that the instrument cannot be reacti-
vated via remote operation and asks you whether you want to continue the
shutdown process.

3. Respond to the safety query with "Yes".

The connection with the controller is terminated and the R&S

 

FSVA/FSV is

deactivated.

 

Deactivating the R&S

 

FSVA/FSV via Remote Operation

Содержание R&S FSV



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды