manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz R&S FSP Series Скачать руководство пользователя страница 302

R&S FSP

Instrument Functions

External Generator Control – Option R&S FSP-B10

4.230

Operating Manual 1164.4556.12 - 06

4.9.2.2

Normalization

NORMALIZE

The 

NORMALIZE

 softkey switches normalization on or off. The softkey is only avail-

able if the memory contains a correction trace.

It is possible to shift the relative reference point within the grid using the 

REF VALUE

POSITION

 softkey. Thus, the trace can be shifted from the top grid margin to the

middle of the grid:

Fig. 4.30 Normalized display 

In the 

SPLIT SCREEN

 setting, the normalization is switched on in the current win-

dow. Different normalizations can be active in the two windows.

Normalization is aborted when the 

NETWORK

 mode is quit.

Remote command:

CORR ON

REF VALUE

POSITION

The 

REF VALUE POSITION

 softkey (reference position) marks a reference position

in the active window on which the normalization (difference formation with a refer-
ence curve) is performed.

When pressed for the first time, the softkey switches on the reference line and acti-
vates the input of its position. The line can be shifted within the grid limits.

The reference line is switched off by pressing the softkey again.

The function of the reference line is explained in the section 

“Calibration Mecha-

nism” on page 4.234

.

Содержание R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды