manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 85 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 85

NB-IoT Signaling

R&S

®

CMW-KM300/-KS300

85

User Manual 1178.5689.02 ─ 06

●

Length of information element (IEIDL, one octet)

●

Information element data (IED, 0 to n octets)

The signaling application sets the TP-UDHI automatically, according to the checkbox.
With enabled checkbox, it sends the hex value to the UE and uses the correct number
of fill bits in the header. It evaluates the IEIa and applies the correct message concate-
nation and header repetition.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:UDHeader

Coding Group

Selects the coding group to be indicated to the message recipient in the TP-Data-Cod-
ing-Scheme field. See also 3GPP TS 23.038.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:CGRoup

Message Class

Selects the message class to be indicated to the message recipient in the TP-Data-
Coding-Scheme field. See also 3GPP TS 23.038.

"None" means that no message class is sent.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:MCLass

Originator SMSC Address

Short message service center address, to be sent to the recipient.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:OSADdress

Originating Address

Address of the originator of the SMS, to be sent to the recipient.

Remote command: 

CONFigure:NIOT:SIGN<i>:SMS:OUTGoing:OADDress

Service Center Time Stamp

Service center time stamp, to be sent to the recipient.

You can configure the time stamp in two ways:

●

Select the time source "CMW Time".
The time stamp is set according to the current date and time of the operation sys-
tem.

●

Select the time source "Date / Time" and configure the time stamp value via the
parameter "Date / Time".

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов