manualshive.com logo in svg

Rohde & Schwarz R&S CMW-KM300, Руководство пользователя, Страница: 53 / 388

Поделиться
Скачать
Rohde & Schwarz R&S CMW-KM300 Скачать руководство пользователя страница 53

NB-IoT Signaling

R&S

®

CMW-KM300/-KS300

53

User Manual 1178.5689.02 ─ 06

Figure 2-27: Noise information

Noise (System BW) Power

Displays the noise power on the downlink channel, i.e. within the cell bandwidth.

Remote command: 

CONFigure:NIOT:SIGN<i>:FADing:POWer:NOISe?

Noise (Total BW) Power

Displays the total noise power, within and outside of the cell bandwidth.

The total noise power is irrelevant for 3GPP test cases. They specify the SNR or the
noise power within the cell bandwidth. The total noise power is only displayed for com-
patibility reasons with Rohde & Schwarz signal generators.

Remote command: 

CONFigure:NIOT:SIGN<i>:FADing:POWer:NOISe:TOTal?

Noise (System BW) Power

Displays the total power ( noise) on the downlink channel, i.e. within the cell
bandwidth.

Remote command: 

CONFigure:NIOT:SIGN<i>:FADing:POWer:SUM?

2.3.6.3

 

Fading Module AWGN

Access: "Config" hotkey > "Internal Fading" node > "Fading Module AWGN" section.

The node enables and configures the AWGN insertion via the fading module. For back-
ground information, see 

Chapter 2.2.3.2, "AWGN Generator"

, 

on page 16.

Figure 2-28: AWGN settings

For carrier aggregation scenarios, you can configure the settings per component car-
rier.

If you combine contiguous carrier aggregation with AWGN, we recommend the follow-
ing AWGN settings:

●

Enable AWGN for one carrier only.

GUI Reference

深圳德标仪器 

135-1095-0799

Содержание R&S CMW-KM300





































































































































































































































































































































































































Отзывы:

Нет отзывов