Peak Performance in Spatial Multiplexing Mode
R&S
®
AMS32-K31
24
User Manual 1175.6678.02 ─ 01
Access:
"File > Test Template Open/New..." in the R&S AMS32 main dialog window
(keyboard shortcut "Ctrl+E") or "EMC32 Explorer > Open Test Template". In the "Hard-
ware Setup Open" dialog opened, select "New > OTA Auto Test" and click "OK".
Select your "OTA Test Method: Sensitivity Mobile Phone" as shown below.
Fig. 3-2: OTA Auto Test Template dialog (default configuration)
For a new dual-antenna MIMO OTA test, you may typically have to open the "General
Settings" dialog to select your hardware setup and adjust the "Communication Set-
tings" and the "Loop Settings". After performing your configurations, click "OK" to save
your test to a file with an appropriate name.
3.1.2.1
Hardware Setup Selection
In the "General Settings" dialog, you can select your previously configured hardware
setup (see
chapter 3.1.1, "Hardware Setup"
Configuration
