Rohde & Schwarz NRPM OTA Power Measurement Solution, Руководство пользователя

Страница: 87 / 229

Firmware update
R&S
®
NRPM
87 Mannual 1425.8663.02 ─ 08
3. In the navigation pane, select "System".
4. Select "Firmware Update".
5. In the "Firmware Update" dialog, select "Select RSU file".
6. In the file browser, select the
*.rsu
file for upload.
The dialog displays the selected file with file size and status.
7. Select "Start update".
During the update process, the program displays a progress bar and informa-
tion on the current state. The update sequence can take a couple of minutes.
When completed, the dialog closes automatically.
8.2.3 Using remote control
If you want to integrate a firmware update function in an application, use
SYSTem:FWUPdate
on page 126.
Example:
You want to update your R&S NRPM3N with the
nrpm3n_FW_18.05.08.05.rsu
file. This file has a size of 10242884 bytes.
To send the file to the sensor for updating the firmware, your application has to
assemble a memory block containing:
SYST:FWUP <block_data>
The
<block_data>
are definite length arbitrary block data as described in
SYSTem:FWUPdate
on page 126.
Updating the firmware