Remote control commands
R&S
®
NRPM
133
Mannual 1425.8663.02 ─ 08
SYSTem:SERRor?
Returns the next static error (if any). Static errors are more severe than normal
error conditions, which can be queried with
normal errors result from, e.g. unknown commands or syntax errors and generally
affect a single parameter or setting, the static errors, usually prevent the execu-
tion of normal measurements.
Usage:
Query only
SYSTem:TLEVels?
Queries the possible power test levels of the sensor.
Usage:
Query only
SYSTem:TRANsaction:BEGin
Starts a series of settings.
Usage:
Event
SYSTem:TRANsaction:END
Ends a series of settings.
Usage:
Event
SYSTem:VERSion?
Queries the SCPI version the sensor's command set complies with.
Example:
SYSTem:VERSion?
Queries the SCPI version.
Response:
1999.0
The sensor complies with the SCPI version from 1999.
Usage:
Query only
Configuring the general functions
