Instrument Functions
R&S
®
NGA100
57
User Manual 5601.8919.02 ─ 03
Figure 6-14: EasyRamp dialog
2. Select the desired channel.
3. Set the selected channel to "Enabled".
The R&S NGA100 enabled the EasyRamp function for the selected channel.
Note: If selected channel is set disabled, corresponding output state of the selected
channel is also disabled.
4. Set the "Ramping Time" of the selected channel.
5. Press [Enter] key to confirm the settings.
Table 6-4: EasyRamp input field
EasyRamp input field
Description
"Output Ramping"
Enable or disable the EasyRamp function individu-
ally for each channel.
"Ramping Time"
Duration taken for the voltage to rise to V
set
.
6.12
Store and Recall
Upon power-up, the instrument loads the stored setting from memory location M1 with
the exception on EasyArb parameters. Auto saved parameters are also applied during
startup.
The R&S NGA100 output state of all channels (Ch 1, Ch 2) is disabled when the recall
function is activated.
Store and Recall
