Rohde & Schwarz NG-B105, Руководство пользователя, Страница: 133 / 201

Remote control commands
R&S
®
NGP800
133 User Manual 5601.5610.02 ─ 09
1
Switches on previous selected channels.
Parameters for setting and query:
<Channel list> <list>
Example: OUTP? (@1)
Queries the output state at channel 1.
Example: See Example "Activating the channels" on page 131.
OUTPut:DELay:DURation <New value for sequence delay (selected channel)>[,
<Channel list>]
OUTPut:DELay:DURation? [<Channel list>]
Sets or queries the duration for output delay.
Setting parameters:
<duration> <numeric value> | MIN | MINimum | MAX | MAXimum
<numeric value>
Numeric value of the duration in seconds.
MIN | MINimum
Minimum value of the duration at 0.001 seconds.
MAX | MAXimum
Maximum value of the duration at 10.00 seconds.
Range:
0.001 to 10.00
*RST: 0.001
Default unit: s
Parameters for setting and query:
<Channel list> <list>
Example: OUTPut:DELay:DURation 1
OUTPut:DELay:DURation?
-> 1
Returns output delay of 1 s.
Example: OUTPut:DELay:DURation? (@1)
Returns output delay at channel 1.
OUTPut:DELay[:STATe] <arg0>[, <Channel list>]
OUTPut:DELay[:STATe]? [<Channel list>]
Sets or queries the output delay state for the selected channel.
Parameters:
<state> 0
Deactivates output delay for the selected channel.
1
Activates output delay for the selected channel.
Parameters for setting and query:
<Channel list> <list>
Configuration commands