manualshive.com logo in svg

Rohde & Schwarz FSW13, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz FSW13 Скачать руководство пользователя страница 92

Getting Started

R&S

®

FSW

92

User Manual 1173.9411.02 ─ 19

useful to maximize an individual window to the entire screen temporarily in order to
analyze the results in more detail.

To switch between a split and a maximized display without having to close and re-open
windows, press the SPLIT/MAXIMIZE key on the front panel. In maximized display, the
currently focused window is maximized. In split display, all active windows are dis-
played.

3.4.5.5

Changing the Display

The display can be optimized for your individual needs. The following display functions
are available and are described in detail in 

chapter 9.4, "Display Settings"

,

on page 590 and 

chapter 7, "Common Analysis and Display Functions"

, 

on page 440.

●

Displaying a simulation of the entire front panel of the instrument on the screen
("Front Panel")

●

Displaying the main function hardkeys in a separate window on the screen ("Mini
Front Panel")

●

Hiding or showing various screen elements

●

Selecting a display theme and colors

●

Changing the display update rate

●

Activating or deactivating the touch-sensitivity of the screen

●

Zooming into the diagram

3.4.6 Getting Help

If any questions or problems concerning the R&S

 

FSW arise, an extensive online help

system is provided on the instrument and can be consulted at any time. The help sys-
tem is context-sensitive and provides information specifically for the current operation
or setting to be performed. In addition, general topics provide an overview on complete
tasks or function groups as well as background information.

3.4.6.1

Calling Up Help

The online help can be opened at any time by selecting one of the "Help" icons on the
toolbar or by pressing the F1 key on an external or the online keyboard.

Calling context-sensitive help

► To display the "Help" dialog box for the currently focused screen element, e.g. a

softkey or a setting in an opened dialog box, select the "Help" icon on the toolbar.

The "Help" dialog box "View" tab is displayed. A topic containing information about
the focused screen element is displayed.

 

 

 

Operating the Instrument

Содержание FSW13































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды