Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1413 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1413 User Manual 1178.8520.02 ─ 08
<li> Limit line
<t> irrelevant
Parameters:
<TraceNumber> 1 to 6
*RST:
1
Example: CALC:LIM2:TRAC 3
Assigns limit line 2 to trace 3.
DISPlay[:WINDow<n>]:STATe <State>
This command changes the display state of the selected measurement window.
Note that this command is maintained for compatibility reasons only. Use the
LAYout
commands for new remote control programs
(See Chapter 12.6.2, "Working with windows in the display" , on page 1026).
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
DISPlay[:WINDow<n>]:TYPE <WindowType>
This command selects the results displayed in a measurement window.
Note that this command is maintained for compatibility reasons only. Use the
LAYout
commands for new remote control programs (see Chapter 12.6.2, "Working with win-
dows in the display" , on page 1026).
The parameter values are the same as for
LAYout:ADD[:WINDow]?
on page 1026.
Suffix:
<n>
.
Window
Parameters:
<WindowType> DIAGram | RSUMmary | MTABle | PEAKlist | SGRam
HCOPy:ITEM:ALL
This command is maintained for compatibility reasons only. It has no effect.
Deprecated commands