Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1335 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1335 User Manual 1178.8520.02 ─ 08
Parameters for setting and query:
<SnmpContact> String containing SNMP contact.
*RST:
"" (empty string)
Example: //Set SNMP contact
SYST:COMM:SNMP:CONT 'ABC'
Manual operation: See "SNMP Contact" on page 820
SYSTem:COMMunicate:SNMP:LOCation <SnmpLocation>
This command sets the SNMP location information for the administrator.
You can also set the location information via SNMP if you do not set it via SCPI.
Parameters for setting and query:
<SnmpLocation> String containing SNMP location.
*RST:
"" (empty string)
Example: //Return SNMP location
SYST:COMM:SNMP:LOC?
Manual operation: See "SNMP Location" on page 820
SYSTem:COMMunicate:SNMP:USM:USER <Name>, <Access>, <Level>[,
<Auth_pwd>[, <Priv_pwd>]]
This command defines a SNMP user profile.
Prerequisites for this command:
●
Select SNMPv3 (
SYSTem:COMMunicate:SNMP:VERSion
on page 1336).
Setting parameters:
<Name> String containing name of the user.
<Access> RO | RW
Defines the access right a user can have.
<Level> NOAuth | AUTH | PRIVacy
Defines the security level.
<Auth_pwd> String containing the authentication password.
<Priv_pwd> String containing the privacy password.
Example: //Create user profile
SYST:COMM:SNMP:VERS V123
SYST:COMM:SNMP:USM:USER 'Peter','RO','PRIV',
'1234','XYZ'
Usage: Setting only
Manual operation: See "SNMPv3 Configuration" on page 819
Configuring the R&S FSV/A