Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1257 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1257 User Manual 1178.8520.02 ─ 08
●
Spectrogram data:
MMEMory:SELect[:ITEM]:SGRam
on page 1258
●
Trace data:
MMEMory:SELect[:ITEM]:TRACe<1...3>[:ACTive]
on page 1259
Example: MMEM:SEL:ALL
Manual operation: See "Items:" on page 644
MMEMory:SELect:CHANnel[:ITEM]:DEFault
MMEMory:SELect[:ITEM]:DEFault
This command selects the current settings as the only item to store to and load from a
configuration file.
Manual operation: See "Items:" on page 644
MMEMory:SELect:CHANnel[:ITEM]:HWSettings <State>
MMEMory:SELect[:ITEM]:HWSettings <State>
This command includes or excludes measurement (hardware) settings when storing or
loading a configuration file.
Measurement settings include:
●
general channel configuration
●
measurement hardware configuration including markers
●
limit lines
Note that a configuration may include no more than 8 limit lines. This number
includes active limit lines as well as inactive limit lines that were used last.
Therefore the combination of inactivate limit lines depends on the sequence of use
with
MMEMory:LOAD:STATe
on page 1260.
●
color settings
Parameters:
<State> ON | OFF | 0 | 1
*RST:
1
Example: MMEM:SEL:HWS ON
Manual operation: See "Items:" on page 644
MMEMory:SELect:CHANnel[:ITEM]:LINes:ALL <State>
MMEMory:SELect[:ITEM]:LINes:ALL <State>
This command includes or excludes all limit lines (active and inactive) when storing or
loading a configuration file.
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: MMEM:SEL:LIN:ALL ON
Managing settings and results