Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1251 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1251 User Manual 1178.8520.02 ─ 08
*RST: *RST has no effect on the decimal separator.
Default is POINt.
Example: FORM:DEXP:DSEP POIN
Sets the decimal point as separator.
Manual operation: See "Saving the Result Summary (Evaluation List) to a File"
on page 257
See
"Save Evaluation List" on page 280
See "Export Peak List" on page 553
See "Decimal Separator" on page 616
MMEMory:CATalog <FileName>
This command returns the contents of a particular directory.
Parameters:
<FileName> String containing the path and directory
If you leave out the path, the command returns the contents of
the directory selected with
MMEMory:CDIRectory
on page 1252.
The path may be relative or absolute. Using wildcards ('*') is
possible to query a certain type of files only.
If you use a specific file as a parameter, the command returns
the name of the file if the file is found in the specified directory,
or an error if the file is not found (
"-256,"File name not
found"
).
Example: MMEM:CAT? 'C:\Data\SPOOL?.PNG'
Returns all files in
C:\Data\
whose names start with
SPOOL
,
have 6 characters and the extension
.PNG
, e.g.:
SPOOL1.PNG,SPOOL2.PNG,SPOOL3.PNG
Example: MMEM:CAT? 'C:\Data\SPOOL6.PNG'
Query whether the file '
SPOOL6.PNG
' also exists in the directory;
Result:
-256,"File name not found;:MMEMory:CATalog?
'C:\Data\SPOOL6.PNG'
Manual operation: See "Selecting Storage Location - Drive/ Path/ Files"
on page 254
MMEMory:CATalog:LONG <Directory>
This command returns the contents of a particular directory with additional information
about the files.
Managing settings and results