Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1132 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1132 User Manual 1178.8520.02 ─ 08
Parameters:
<Time> Range: 125 ns to 16 s
*RST: 5 ms
Default unit: S
Example: SWE:EGAT:CONT:PLEN 10
Manual operation: See "Gate Period Length" on page 496
[SENSe:]SWEep:EGATe:CONTinuous[:STATe] <State>
Activates or deactivates continuous gating.
This setting is only available if
[SENSe:]SWEep:EGATe
is "On".
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
*RST:
0
Example: SWE:EGAT ON
Activate gating
SWE:EGAT:CONT:STAT ON
Activate continuous gating
Manual operation: See "Continuous Gate" on page 496
[SENSe:]SWEep:EGATe:HOLDoff <DelayTime>
This command defines the delay time between the gate signal and the continuation of
the measurement.
Note: If you perform gated measurements in combination with the IF Power trigger, the
R&S FSV/A ignores the holding time for frequency sweep, FFT sweep, zero span and
I/Q mode measurements.
Parameters:
<DelayTime> Range: 0 s to 30 s
*RST: 0 s
Default unit: S
Example: SWE:EGAT:HOLD 100us
Manual operation: See "Gate Delay" on page 495
[SENSe:]SWEep:EGATe:LENGth <GateLength>
This command defines the gate length.
Setting basic measurement parameters