Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1061 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1061 User Manual 1178.8520.02 ─ 08
[SENSe:]MIXer<x>:HARMonic:TYPE <OddEven>
This command specifies whether the harmonic order to be used should be odd, even,
or both.
Which harmonics are supported depends on the mixer type.
Suffix:
<x>
.
1..n
irrelevant
Parameters:
<OddEven> ODD | EVEN | EODD
ODD | EVEN | EODD
*RST: EVEN
Example: MIX:HARM:TYPE ODD
Manual operation: See "Harmonic Type" on page 410
[SENSe:]MIXer<x>:HARMonic[:LOW] <HarmOrder>
This command specifies the harmonic order to be used for the low (first) range.
Suffix:
<x>
.
1..n
irrelevant
Parameters:
<HarmOrder> Range: 3 to 128 (USER band); for other bands: see band
definition
*RST: 4 (for band U)
Example: MIX:HARM 3
Manual operation: See "Harmonic Order" on page 410
[SENSe:]MIXer<x>:IF?
Queries the intermediate frequency currently used by the external mixer.
Suffix:
<x>
.
1..n
irrelevant
Example: MIX:IF?
Example: See "Programming example: working with an external mixer"
on page 1068.
Usage: Query only
Setting basic measurement parameters