Rohde & Schwarz FSV3000, Руководство пользователя

Страница: 1039 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1039 User Manual 1178.8520.02 ─ 08
Parameters:
<Impedance> 50 | 75
numeric value
User-defined impedance from 50 Ohm to 100000000 Ohm
(=100 MOhm)
User-defined values are only available for the Spectrum applica-
tion, the I/Q Analyzer, and some optional applications.
*RST:
50 Ω
Default unit: OHM
Example:
INP:IMP 75
Manual operation: See "Impedance" on page 358
See "Unit" on page 457
INPut<ip>:IMPedance:PTYPe <PadType>
Defines the type of matching pad used for impedance conversion for RF input.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<PadType> SRESistor | MLPad
SRESistor
Series-R
MLPad
Minimum Loss Pad
*RST:
SRESistor
Example: INP:IMP 100
INP:IMP:PTYP MLP
Manual operation: See "Impedance" on page 358
INPut<ip>:SELect <Source>
This command selects the signal source for measurements, i.e. it defines which con-
nector is used to input data to the R&S
FSV/A.
If no additional input options are installed, only RF input is supported.
Suffix:
<ip>
.
1 | 2
irrelevant
Parameters:
<Source> RF
Radio Frequency ("RF INPUT" connector)
FIQ
I/Q data file
Setting basic measurement parameters