Rohde & Schwarz FSQ series, Быстрый старт

Страница: 145 / 229

Quick Start Guide 1313.9652.62 - 02 5.35
R&S FSQ Basic Measurement Examples
Storing and Loading Instrument Settings
5.6.2 Loading an Instrument Configuration
An instrument configuration can be loaded in either of the following two ways:
1. By directly entering the data record name:
➢
Press the FILE key and then the RECALL softkey.
➢
Enter the name of the data record to be loaded (which is a digit from 0 to 9 in the simplest
case) and press
ENTER . The data record will be loaded.
2. By selecting the data record from a list:
➢
Press the FILE key and then the RECALL softkey.
➢
Press the ITEMS TO SAVE/RCL softkey.
The list of available data records is shown.
➢
Select the data record to be loaded by using the rotary knob and confirm by pressing
ENTER twice. The data record will be loaded.
➢
To change the instrument configuration path, use the EDIT PATH softkey.
To load stored traces, use the ITEMS TO SAVE/RCL softkey to select
the All Traces field.
During loading, the R&S FSQ detects which parts the called data
record contains and, if applicable, ignores any partial data records that
were selected but are not available.