Rohde & Schwarz FSQ series, Быстрый старт

Страница: 144 / 229

R&S FSQ Basic Measurement Examples
Storing and Loading Instrument Settings
5.34 Quick Start Guide 1313.9652.62 - 02
The default path for the instrument configurations is D:\USER\CONFIG . The file names of the
data records end with ".FSP".
5.6.1.1 Storing Traces
Before you can store traces, you must first select the associated partial data record. For this
purpose proceed as follows:
➢
Press the FILE key and then the SAVE softkey.
➢
Press the ITEMS TO SAVE/RCL softkey. The entry cursor jumps to the first entry in the
Items field.
➢
Using the rotary knob, move the cursor to All Traces in the Items field and then select the
partial data record by pressing the rotary knob or ENTER.
➢
Using the rotary knob, move the cursor to the File Name field and activate text entry by
pressing the rotary knob.
➢
Enter a file name (or digit from 0 to 9) and store the data record by pressing ENTER .
The name of a data record may contain letters and digits. If necessary,
the desired directory can be placed in front of the name of the data
record (the directory will then automatically be used for any further save
and recall operations).
You can enter file names via the front panel keypad by using the
alphanumeric editor, which can be called by pressing the arrow key
U d
.
The operation of the editor is described in the section “ Editing
Alphanumeric Parameters” on page 4.9 .
You can cancel the selection by pressing the rotary knob or the ENTER
key again.
You can select additional instrument settings to be stored by marking
additional fields.
In addition, the
ENABLE ALL ITEMS / DISABLE ALL ITEMS softkeys
are available for selecting all partial data records or for cancelling the
selection.