Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 46 / 418

Getting Started
R&S
®
EX-IQ-BOX
31 User Manual 1409.5570.32 ─ 05
4.3.1.2 User Interface
Fig. 4-2: TYCO Z-Dok adapter board connector, 56 differential pairs
See
​
chapter 10.1.1, "Z-DOK-Adapter Board Connector" , on page 355.
User interface for serial or parallel transmission of digital I/Q data (up to 20 bit wide data
bus), data clock and control signals, connected by a 168 pin connector, type TYCO Z-
Dok (56 differential pairs).
This interface is used to connect the breakout boards.
4.3.1.3 MODE - LED
The MODE LED indicates current activities of the R&S EX-IQ-BOX.
●
Green blinking : the configuration file (application specific image) is loading.
●
Green continuous : the configuration file (application specific image) is currently
active. Data transmission is possible.
●
Yellow blinking : the initialization (initial image) is loading.
●
Yellow continuous : the initialization (initial image) is currently active.
●
Off : there is no configuration file loaded. Therefore, data transmission is not possible.
4.3.1.4 ERROR - LED
The ERROR LED indicates an error of the R&S EX-IQ-BOX.
●
Off : no error occurred.
●
Red : an error has been detected. R&S DigIConf or the connected R&S instrument
display an error message.
Control Elements and Connectors