Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 44 / 418

Getting Started
R&S
®
EX-IQ-BOX
29 User Manual 1409.5570.32 ─ 05
4.2 Unpacking the R&S EX-IQ-BOX
To remove the device from its packaging and check the equipment for completeness
proceed as follows:
1. Remove the R&S
EX-IQ-BOX and the various components from their packaging.
2. Check the equipment for completeness using the delivery list.
3. Check the device for any damage. If there is damage, immediately contact the carrier
who delivered the device. Make sure not to discard the box and packing material.
Packing material
Retain the original packing material. If the R&S EX-IQ-BOX needs to be transported or
shipped at a later date, you can use the material to prevent control elements and con-
nectors from being damaged.
Risk of injury and instrument damage if stacking instruments
A stack of instruments may tilt over and cause injury and material damage because the
instrument's top surface area is too small.
Never stack instruments on top of each other. If you need to stack instruments, install
them in a rack.
4.3 Control Elements and Connectors
This section explains the control elements and connectors of the R&S EX-IQ-BOX with
the aid of the front and rear views.
Unpacking the R&S EX-IQ-BOX