Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 350 / 418

Remote Control Commands
R&S
®
EX-IQ-BOX
335 User Manual 1409.5570.32 ─ 05
Return values:
<src> PATTern | IQIN | IQOutput | ARB1 | ARB2 | ARB3 | ARB4 |
RECorder | STATic | SYNC | PRBS
Example: EBOX:CPRI:TX:AXC0:PSRC?
Response:
"PATT"
Usage: Query only
[:SOURce<hw>]:EBOX:CPRI:TX|RX:AXC<ch0>:SIZE?
Queries the size of the AxC in bits. The size depends on the selected signal source.
With the exception of signals from the signal source Sync Pattern, the size is calculated
using the following formula:
 
2 Re / _
 
signal axc
solution Q I bit size AxC
For Sync Pattern signals, calculate the source with the formula:
 
signal axc
Length Pattern bit size AxC

_
Return values:
<Size> integer
Range:
2 to 40
Increment: 1
*RST:
32
Example:
SOUR1:EBOX:CPRI:TX:AXC1:SIZE?
check the AxC size.
Response:
32
the length of AxC1 is 32 bit.
Usage: Query only
Manual operation: See "AxC Table" on page 188
[:SOURce<hw>]:EBOX:CPRI:TX|RX:AXC<ch0>:SOURce?
Queries the signal name the AxC is assigned to.
Note: This command applies to downlink.
Return values:
<Source> string
Example: SOUR1:EBOX:CPRI:TX:AXC0:SOUR?
check the signal allocated in AxC 0.
Response:
signal_1
signal_1 is assigned to the first AxC.
Usage: Query only
Manual operation: See "AxC Table" on page 188
CPRI Remote Control Commands