Remote Control Commands
R&S
®
EX-IQ-BOX
325
User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:TEST:BER:RX:WORDs?
The command queries the number of received IQ words during low level BER RX test.
Low level BER test consecutively counts the number of received words in order to com-
pare them with the sent data and to determine the error rate.
Return values:
<Words>
integer
Increment: 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:BER:RX:WORD?
query the number of received IQ words.
Response:
10005
R&S
DigIConf received 10005 words during low level BER test.
Usage:
Query only
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TEST:BER:TX:STATe
<Execute>
The command starts the transmission of the test data.
Parameters:
<Execute>
ON | OFF
*RST:
OFF
Example:
SOUR1:EBOX:CPRI:TEST:BER:TX:STAT ON
start PRBS TX test.
[:SOURce<hw>]:EBOX:CPRI:PRBS:RST
Resets the PRBS test.
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:EBOX:CPRI:TEST:RX:LOF?
Queries whether the received signal is synchronized correctly, i.e. LOF (
L
oss
o
f
F
rame).
Return values:
<Lof>
0 | 1
*RST:
0
Example:
SOUR1:EBOX:CPRI:TEST:RX:LOF?
check if received data is synchronized.
Response:
1
(error), data lost synchronization.
Usage:
Query only
Manual operation:
See
CPRI Remote Control Commands
Содержание EX-IQ-BOX
Страница 147: ...Protocol Settings R S EX IQ BOX 132 User Manual 1409 5570 32 05 CPRI...
Страница 391: ......
