Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 338 / 418

Remote Control Commands
R&S
®
EX-IQ-BOX
323 User Manual 1409.5570.32 ─ 05
Example: SOUR1:EBOX:CPRI:SETT:DEL "d:
\DigIConf\Settings\CPRI\RETest.cpri"
delete the file
RETest.cpri
.
Usage: Setting only
[:SOURce<hw>]:EBOX:CPRI:SETTing:LOAD <Load>
The command loads a previously saved CPRI configuration. Define directory and file
name, R&S
DigIConf automatically assigns the file extension
*.cpri
.
Setting parameters:
<Load> <directory>, <file_name>
String parameter to determine the target directory and the file-
name for loading the settings file.
Example: SOUR1:EBOX:CPRI:SETT:LOAD "D:
/USER/CPRISettings/RETest"
load the CPRI settings file
RETest.cpri
from the directory
d:\USER\CPRISettings
.
Usage: Setting only
Manual operation: See "Save / Recall" on page 152
[:SOURce<hw>]:EBOX:CPRI:SETTing:STORe <Store>
Saves the current CPRI signal configuration. Specify the directory and file name.
R&S
DigIConf automatically assigns the file extension
*.cpri
to CPRI configuration
files.
Setting parameters:
<Store> <directory>, <file_name>
String parameter to determine the target directory and the file-
name for storing the settings file.
Example: SOUR1:EBOX:CPRI:SETT:STOR "D:
/USER/CPRISettings/RETest"
save the currently defined CPRI settings in the file
RETest.cpri
in the directory
d:\USER\CPRISettings
.
Usage: Setting only
Manual operation: See "Save / Recall" on page 152
9.4.8 CPRI Test & Diagnostics Subsystem
The
TEST:
& Diagnostics subsystem contains the remote-control commands to get
information on the SFP transceiver connection and RX alarms. You also find the com-
mands for executing a low level BER test in this panel.
CPRI Remote Control Commands