Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 329 / 418

Remote Control Commands
R&S
®
EX-IQ-BOX
314 User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:CPRI:L1:RX:REMote:RAI?
Queries the RAI ( R emote A rm I ndication) state at the DUT, i.e. if any remote part of the
end-to-end link has failed.
Return values:
<rai> 0 | 1 | OFF | ON
Example:
SOUR1:EBOX:CPRI:L1:RX:REM:RAI?
check if a remote part of the end-to-end link has failed.
Response:
0
if OK,
1
if not OK
Usage: Query only
Manual operation: See "Remote Alarms" on page 169
[:SOURce<hw>]:EBOX:CPRI:L1:RX:REMote:RESet?
Queries whether the DUT is in reset state.
Return values:
<reset> 0 | 1 | OFF | ON
1
CPRI RE test mode: Confirms that a reset was performed.
CPRI REC test mode: Confirms a reset request.
0
CPRI RE test mode:
No reset was performed.
CPRI REC test mode: No reset is requested.
Example: SOUR1:EBOX:CPRI:L1:RX:REM:RES?
check the reset state of the DUT.
Usage: Query only
Manual operation: See "Remote Alarms" on page 169
[:SOURce<hw>]:EBOX:CPRI:L1:RX:REMote:SAP?
Queries whether the data communication failed (SDI S ervice Access Point D efect I ndi-
cation).
Return values:
<sap> 0 | 1 | OFF | ON
Example: SOUR1:EBOX:CPRI:L1:RX:REM:SAP?
check the data communication.
Response:
1 (error)
data communication failed.
Usage: Query only
Manual operation: See "Remote Alarms" on page 169
CPRI Remote Control Commands