Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 320 / 418

Remote Control Commands
R&S
®
EX-IQ-BOX
305 User Manual 1409.5570.32 ─ 05
Parameters:
<State> OFF | ON
*RST:
OFF
Example: SOUR1:EBOX:CPRI:HW:HSSS:OUTP:SFP2 ON
activates the SFP2 interface for signal output.
Manual operation: See "Outputs" on page 160
[:SOURce<hw>]:EBOX:CPRI:HW:HSSS:OUTPut:SMA[:STATe] <State>
Determines the SMA ( S ub M iniatur version A ) interface for signal output, i.e. aligns the
transmitter type of the DUT. You can activate more than one interface for the signal output
simultaneously, e.g. set SFP1 for signal transmission to the DUT, and SMA for signal
monitoring.
Parameters:
<State> OFF | ON
*RST:
OFF
Example: SOUR1:EBOX:CPRI:HW:HSSS:OUTP:SMA ON
activates the interface for signal output.
Manual operation: See "Outputs" on page 160
[:SOURce<hw>]:EBOX:CPRI:HW:LBRate <Lbrate>
Selects the line bit rate for the communication link.
The available line speed depends on the CPRIbreakout board version, see
​
"CPRI Line
Bit Rate" on page 157
Parameters:
<Lbrate> LR2X | LR4X | LR5X | LRAuto | LR1X | LR8X | LR10X | LR16X
LR1X
1x614.4 Mbit/s
LR2X
2x1228.8 Mbit/s
LR4X
4x2457.6 Mbit/s
LR5X
5x3072.0 Mbit/s
LR8X
5x4915.2 Mbit/s
LR10X
5x6144.0 Mbit/s
LR16X
5x9830.4 Mbit/s
*RST:
LR2X
CPRI Remote Control Commands