Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 31 / 418

System Overview
R&S
®
EX-IQ-BOX
16 User Manual 1409.5570.32 ─ 05
3.1.2 R&S Instruments Controlling the R&S EX-IQ-BOX
This operating mode applies to the previous model of the R&S EX-IQ-BOX
1409.5502.02 and User Defined applications.
The R&S EX-IQ-BOX"1409.5505K04" is always controlled by R&S DigIConf.
R&S Instrument
(equipped with digital interface)
Data
Control
Reference
REF OUT
USB Host
DIG. IQ OUT IQ IN
DUT
R&S EX-IQ-BOX
User
Interface
Breakout Board
Data
USB IN
REF IN
Fig. 3-3: Configuration example of the R&S EX-IQ-BOX, directly controlled by an R&S instrument
This example shows a basic configuration of the R&S EX-IQ-BOX 1409.5502.02, working
with an R&S signal generator. The R&S EX-IQ-BOX operates in transmitter mode from
the signal generator to the DUT.
3.1.3 Remote Control of the R&S EX-IQ-BOX
Remote control functionality provides access to the measurement from a remote com-
puter (external controller). By means of remote commands, settings or data are trans-
mitted to the R&S
EX-IQ-BOX via R&S DigIConf. Remote programs automate repeated
settings. The remote control programs can either run on the same computer as the
R&S
DigIConf or on any PC in the network.
Remote control of R&S DigIConf is performed via a LAN socket communication protocol,
also referred to as Raw Socket communication .
Socket communication uses the TCP/IP network protocol. A VISA installation on remote
controller side is not mandatory. Connection can also be performed with a
Win Socket
communication .
If you use a VISA library, the access is more convenient.
Basic Operating Modes