Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 299 / 418

Remote Control Commands
R&S
®
EX-IQ-BOX
284 User Manual 1409.5570.32 ─ 05
[:SOURce<hw>]:EBOX:USER:SSI:CMSize <CMSize>
Defines the number of the Control & Management bits, following the I/Q data word. The
size is defined from 0 up to 32 bits.
Parameters:
<CMSize> float
Range:
0 to 32
Increment: 1
Example: EBOX:USER:SSI:CM:SIZE 8
sets 12 bit for control information.
Manual operation: See "C&M Size" on page 124
[:SOURce<hw>]:EBOX:USER:SSI:GAIN:FSELect <FSelect>
Defines a binary file contianing a gain table.
Parameters:
<FSelect> string
Example: EBOX:USER:SSI:GAIN:FSEL "gainFile.hex"
Manual operation: See "Gain File" on page 125
[:SOURce<hw>]:EBOX:USER:SSI:GAIN:STATe <State>
Activates the automatic gain handling.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: EBOX:USER:SSI:GAIN:STAT ON
Manual operation: See "Enable Automatic Gain" on page 125
[:SOURce<hw>]:EBOX:USER:SSI:LFSYnc <Lfsync>
Parameters:
<Lfsync> 0 | 1 | OFF | ON
*RST:
0
Manual operation: See "Late Frame Sync" on page 125
[:SOURce<hw>]:EBOX:USER:SSI:SIZE <Size>
Defines the word size an I or Q data word in bits.
Parameters:
<Size> float
Range:
4 to 24
User Defined - Remote Control Commands