Rohde & Schwarz EX-IQ-BOX, Руководство пользователя

Страница: 221 / 418

Protocol Settings
R&S
®
EX-IQ-BOX
206 User Manual 1409.5570.32 ─ 05
The recent data sets directory shows the files last used.
Select the directory where waveform files are stored. The available waveform files, iden-
tifiable by the file extension
*.wv
are shown.
The "Select" button loads the marked file and returns to the "ARB" dialog. The "ARB
Sources" table indicates the file name and its path, that means the directory where the
file is stored.
Note: The FILE MANAGER button leads to a dialog used to copy, delete and rename
files, and to create new directories.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
ARB<ch>:
​
FILE
​
on page 289
Option(s)
If the wave form file is provided by R&S WinIQSIM2, and is based on a digital standard,
R&S
DigIConf indicates the name of the option, like EXBOX-K242, which represents the
3GPP-FDD-Standard. "None" indicates that the loaded waveform file was created with
another software, or does not base on a digital standard signal.
Note: Find the list of supported R&S options in chapter
​
chapter 3.2.2.4, "Digital Standards
with R&S WinIQSIM2" , on page 23.
Remote command:
Installed options:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
OPT
​
on page 250
Sample Rate /MHz
Displays the sample rate of the signal, loaded from the waveform memory. The sample
rate represents the number of samples per second that are used for digitizing.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
ARB<ch>:
​
SRATe?
​
on page 290
Samples
Indicates the number of samples the loaded signal is composed of.
Remote command:
​
[:
​
SOURce<hw>]:
​
EBOX:
​
CPRI:
​
ARB:
​
SAMPles:
​
TOTal?
​
on page 288
CPRI