Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 271 / 418

Remote Commands
R&S
®
EVSG1000
271 User Manual 1178.6227.02 ─ 06
OFF
The R&S EVSG1000 must be set to "OFF”" or must be restarted
to activate local operation by keyboard.
Return values:
<State> READY.
The command was executed successfully.
SETUP:NTPSERVER?
SETUP:NTPSERVER
<IPAdress>
Defines the IP address of the NTP server used for time synchronization of the internal
R&S
EVSG1000 clock (see
SETUP:TIMESYNC
on page 266).
Parameters:
<IPAdress> TCP/IP address between 0.0.0.0 and 0.255.255.255
Example: SETUP:TIMESYNC NTP
SETUP:NTPSERVER 10.0.2.166
Usage: Setting only
10.1.12 Deprecated Commands
The following commands are maintained for compatibility with former
Rohde
& Schwarz analyzers only. For new remote control programs, use the following
commands:
●
MODE_LOC
on page 273
●
MODE_LOC
on page 273
●
MODE_GP
on page 273
●
MODE_MB
on page 306
●
MODE_VOR
on page 313
●
MODE_COM
on page 322
●
MODE_FSCAN
on page 351
●
MODE_IFSPECT
on page 355
●
MODE_FFT
on page 360
●
MODE_SCOPE
on page 367
M?
................................................................................................................................272
MB
............................................................................................................................... 272
MI
.................................................................................................................................272
MV
............................................................................................................................... 273
Common Instrument and Measurement Setup