Rohde & Schwarz EVSG-B1, Руководство пользователя

Страница: 121 / 418

Numeric Measurement Modes
R&S
®
EVSG1000
121 User Manual 1178.6227.02 ─ 06
This preview spectrum allows you to check if the current measurement settings are
appropriate, such as the bandwidth or frequency offsets. For a larger, more detailed
spectrum diagram, select one of the graphical Spectrum modes. If you switch to such a
mode directly from a numeric measurement mode, the current measurement settings
are applied to the spectrum automatically.
4.4.1.3 COM Main View
The COM Main view provides the following measurement results for the 1 kHz/
1.2 kHz test tone (see "Tone Freq." on page 125):
Figure 4-25: COM Main view
You can display graphical results directly from the COM mode by selecting the softkey
in the "Meas" menu. In this case, the settings for the current measurement are applied
to the graphical results.
To return from the graphical results to the COM mode, select "Return" ([F7]).
For details on the graphical results, see:
●
Chapter 5.1, "RF Spectrum Mode (Option R&S EVSG-K10)" , on page 139
●
Chapter 5.2, "IF Spectrum Mode (Option R&S EVSG-K10)" , on page 144
●
Chapter 5.3, "AF Spectrum Mode (Option R&S EVSG-K11)" , on page 149
●
Chapter 5.4, "AF Time Domain Mode (Option R&S EVSG-K12)" , on page 158
COM Mode (Option R&S EVSG-K6)