Quick Start
R&S
®
ESRP
69
User Manual 1175.7445.02 ─ 08
1. Press the [SETUP] key.
2. Press the "Display Setup" softkey.
3. Press the "Tool Bar State On/Off" softkey.
Or:
4. Press the [DISPLAY] key.
5. In the "Display Settings" dialog box, select "Tool Bar State: On".
The toolbar is displayed at the top of the screen.
Remote:
DISP:TBAR:STAT ON
The following functions are available:
Table 3-2: Standard Application Functions in the Toolbar
Icon
Description
Opens the "Select Mode" menu (see
Chapter 3.4.1.1, "Channel Display"
Opens an existing measurement (settings) file
Stores the current measurement file
Prints the current measurement screen
Saves the current measurement screen as a file (screenshot)
Reverts last operation.
Repeats previously reverted operation.
Selection mode: the cursor can be used to select (and move) markers in a zoomed display
Zoom mode: displays a dotted rectangle in the diagram that can be expanded to define the
zoom area. Can be repeated several times.
Zoom off: the diagram is displayed in its original size
3.4.2.2
Touchscreen
A touchscreen is a screen that is touch-sensitive, i.e. it reacts in a specified way when
a particular element on the screen is tapped by a finger or a pointing device, for exam-
ple. Any user interface elements that can be clicked on by a mouse pointer can also be
tapped on the screen to trigger the same behavior, and vice versa. Using the touch-
screen, the following tasks (amoung others) can be performed by the tap of your finger:
●
Changing a setting
●
Changing the display
●
Moving a marker
●
Zooming into a diagram
●
Saving or printing results and settings
Basic Operations
