Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 496 / 1094

System Configuration
R&S
®
ESRP
493 User Manual 1175.7445.02 ─ 08
The "Selected Object" list is displayed to select the object. To set the color, the prede-
fined colors are displayed.
Remote command:
DISPlay:CMAP<item>:HSL
on page 946
HCOPy:CMAP<item>:HSL
on page 927
Predefined Colors ← Screen Colors ← Display Setup
In the "Color Setup" dialog box, displays the "Predefined Colors" (alternatively to the
"Predefined Colors" button). This softkey is only available if, in the "Select Color Set"
dialog box, the "User Defined Colors" option is selected or the "Color Setup" dialog box
is displayed.
For details on screen colors, refer to Chapter 3.2.4.4, "Setting the Screen Colors" ,
on page 48.
Remote command:
DISPlay:CMAP<item>:PDEFined
on page 946
HCOPy:CMAP<item>:PDEFined
on page 928
User Defined Colors ← Screen Colors ← Display Setup
In the "Color Setup" dialog box, displays the "User Defined Colors" (alternatively to the
"User Defined Colors" button). This softkey is only available if, in the "Select Color Set"
dialog box, the "User Defined Colors" option is selected or the "Color Setup" dialog box
is displayed.
For details on screen colors, refer to Chapter 3.2.4.4, "Setting the Screen Colors" ,
on page 48.
Remote command:
DISPlay:CMAP<item>:HSL
on page 946
HCOPy:CMAP<item>:HSL
on page 927
Set to Default ← Screen Colors ← Display Setup
Opens the "Set to Default" dialog box to select one of the factory default color settings.
Remote command:
DISPlay:CMAP<item>:DEFault
on page 945
HCOPy:CMAP<item>:DEFault
on page 927
Print Colors ← Display Setup
Opens a submenu to select the colors for the printout. To facilitate color selection, the
selected color combination is displayed when the menu is entered. The previous colors
are restored when the menu is exited.
For details on screen colors, refer to Chapter 3.2.4.4, "Setting the Screen Colors" ,
on page 48.
The submenu contains the following commands:
●
"Select Print Color Set" on page 494
●
"Color (On/Off)" on page 494
●
"Select Object" on page 516
●
"Predefined Colors" on page 516
●
"User Defined Colors" on page 516
●
"Set to Default" on page 516
Instrument Setup and Interface Configuration – SETUP Key