I/Q Analyzer
R&S
®
ESRP
440
User Manual 1175.7445.02 ─ 08
The setting 75 Ω should be selected if the 50 Ω input impedance is transformed to a
higher impedance using a 75 Ω adapter of the RAZ type (= 25 Ω in series to the input
impedance of the instrument). The correction value in this case is 1.76 dB = 10 log (75
Ω/50 Ω).
All levels specified in this Operating Manual refer to the default setting of the instru-
ment (50 Ω).
Remote command:
7.3
Softkeys of the Marker To Menu in I/Q Analyzer Mode
In I/Q Analyzer mode, The "Marker To" menu is identical to the one in Spectrum mode
(see
"Softkeys of the Marker To Menu"
on page 382). For the "Real/Imag (I/Q)" display
mode, however, an additional function is available.
Search Settings
Opens a dialog box to define which data is used for marker search functions.
Note:
The search settings apply to all markers, not only the currently selected one.
"Search Real"
Marker search functions are performed on the real trace of the I/Q
measurement.
"Search Imag"
Marker search functions are performed on the imaginary trace of the
I/Q measurement.
"Search Mag-
nitude"
Marker search functions are performed on the magnitude of the I and
Q data.
Remote command:
7.4
Softkeys of the Trigger Menu in I/Q Analyzer Mode
In I/Q Analyzer mode, the "Trigger" menu, which is displayed when you select the
[TRIG] key, contains the following functions:
.......................................................................................442
Softkeys of the Trigger Menu in I/Q Analyzer Mode