Rohde & Schwarz ESRP Series, Руководство пользователя

Страница: 214 / 1094

Spectrum Measurements
R&S
®
ESRP
211 User Manual 1175.7445.02 ─ 08
Compatibility to R&S FSP
User standards created on an analyzer of the R&S FSP family are compatible to the
R&S
ESRP. User standards created on an R&S ESRP, however, are not necessarily
compatible to the analyzers of the R&S FSP family and may not work there.
To store a user-defined configuration
1. Select the "User Standard" softkey in the "Ch Power" menu.
2. Press "Save".
3. Define a file name for the user standard and select its storage location.
By default, the xml file is stored in
C:\R_S\Instr\acp_std\
. However, you can
define any other storage location.
4. Press "Save".
The following parameter definitions are saved:
●
"# of Adj Chan" on page 213
● Channel spacing and adjacent-channel spacing, see "Spacing" on page 215
● Channel bandwidth of transmission (Tx), adjacent (Adj) and alternate (Alt)
channels, see "Bandwidth" on page 214
● Resolution bandwidth, see "Res BW Auto" on page 332
● Video bandwidth, see "Video BW Auto" on page 333
● Detector, see "Detector" on page 362
● ACLR limits and their state, see "Limits" on page 217
● Sweep time and sweep time coupling, see "Sweep Time" on page 219
● Trace and power mode, see "Select Trace" on page 219 and "Power Mode"
on page 218
To load a user-defined configuration
► Press "User Standard > Load" and select the user standard file.
Softkeys for Channel and Adjacent-Channel Power Measurements
Ch Power ACLR ..........................................................................................................212
└ CP/ACLR Standard .......................................................................................212
└ CP/ACLR Settings ........................................................................................ 213
└ # of TX Chan .......................................................................................213
└ # of Adj Chan ...................................................................................... 213
└ Channel Setup .................................................................................... 213
└ Bandwidth .................................................................................214
└ ACLR Reference ............................................................ 215
└ Spacing .....................................................................................215
└ Names ...................................................................................... 216
└ Weighting Filter .........................................................................216
└ Limits ........................................................................................ 217
└ Limit Checking ................................................................217
└ Relative Limit ..................................................................218
└ Absolute Limit .................................................................218
└ Check ............................................................................. 218
Measurements