Quick Start
R&S
®
ESRP
115
User Manual 1175.7445.02 ─ 08
5. Press the "Save File" softkey.
The settings file is stored and the dialog box is closed.
3.5.5.2
Storing Traces
Before you can store traces, you must first select the corresponding item entry. To do
so, proceed as follows:
1. Press the [SAVE/RCL] key.
2. Press the "Save" softkey.
3. To change the suggested name, enter a file name.
4. Select the "All Traces" option.
5. Press the "SAVE" button.
3.5.5.3
Loading an Instrument Configuration (with Traces)
1. Press the [SAVE/RCL] key.
2. Press the "Recall" softkey.
3. If necessary, select the path under which the file to be loaded is stored.
4. Define the settings file to be loaded. One of the following ways is possible:
● Click in the
File Name
field and enter the file name via the keyboard or key-
pad.
● Select the file from the selection list using the touchscreen or mouse.
Alternatively:
a) Press the "Select File" softkey.
The focus is set on the files list.
b) Using the rotary knob or arrow keys, focus the settings file to be loaded and
confirm by pressing the rotary knob or the [ENTER] key.
5. To load traces, select the "All Traces" option.
Note:
The "All Traces" option is only available if the selected file contains traces.
6. Press the "Recall" button in the dialog box, or the "Recall File" softkey.
The settings file is loaded. During loading, the R&S
ESRP detects which items the
selected settings file contains and, if applicable, ignores any items that were
selected but are not available.
3.5.5.4
Configuring Automatic Loading
If the R&S
ESRP is switched on in the factory default state, it loads the instrument set-
tings that it had when switched off (provided that it was switched off using the [ON /
Basic Measurement Examples