Installation and Operation Manual 90DIB500IM02 – 5.2
107
DIB-500 R4.1
Commissioning
Configuring the DIB-500 R4.1
➥
The "command prompt" is displayed:
Figure 5.24 Command prompt
2. Enter the command below to delete the ARP buffer:
arp -d
✓
You have successfully deleted the ARP buffer.
5.7.4
Configuring and generating network configurations via the
NMC-515 ConfigurationManager
Via the NMC-515 ConfigurationManager network management client, the network con-
figuration for an ACCESSNET
®
-T-network is created based on the defined network
design. For this purpose, the NMC-515 ConfigurationManager permits the creation and
adaptation of an ACCESSNET
®
-T network model. The calculations of the required con-
figurations for the operating systems and software components used and the genera-
tion of the configuration files are based on this network model.
The procedures for operating the NMC-515 ConfiguationManager network manage-
ment client are described in the related product documents, refer to Table 5.10.
Table 5.10 Required product documents
Product
Document type
NMC-515 ConfigurationMan-
ager
User Manual
