
CDMA2000 Signaling
R&S
®
CMW-KM8xx/-KS8xx
494
User Manual 1173.9511.02 ─ 12
3. Wait until the R&S
CMW has sent the specified number of test packets and read
the results from the FER view.
4.2.17.2
RLP and IP Statistics
The RLP measurement evaluates the data flow between DUT and R&S
CMW using
packet data service option SO33 (see
chapter 4.2.11.4, "Packet Data Service"
on page 479). The measurement results consist of RLP frame counters, PPP total
bytes and the data rate in both reverse (Rx) and forward (Tx) direction. The results are
available and constantly updated while a PPP connection is active and the measure-
ment is switched on.
Established call required
The "RX Meas RLP" requires packet data call (SO33) to be established via the signal-
ing application using DAU, see
chapter 4.2.3, "End to End Packet Data Connections"
RLP measurement requires options for DAU, see
chapter 4.2.3, "End to End Packet
The RLP results are presented in a table with four different columns containing the
number of RLP frames that R&S
CMW detected:
●
"Rx": Number of RLP frames received in the last update period
General Description
深圳德标仪器
135-1095-0799