Rohde & Schwarz CLIPSTER 6 Mk2, Руководство пользователя, Страница: 41 / 78

Installation and Operation
41
User Manual (Hardware) | 2904.4460.02 - 04
Operating the System
CLIPSTER
Shutting Down the System
There are several possibilities to shut down the system. It depends on
whether the operating system is already loaded, frozen or not completely
loaded. Please act accordingly.
Shut down with operating system fully loaded
If the operating system is up and running, there are two ways to shut down
your system.
Perform the following steps:
1. Turn the system off by shutting down the operating system through the
Windows menu.
 The operating system will then save your personal settings and once it
has ended, the system will turn off.
2. Alternatively, you can initiate a fast shut down by pressing the power
switch briefly.
 Some settings will be saved and afterwards the system turns off.
System is shut down.
Shut down with operating system frozen or not completely loaded
If the operating system is not responding anymore or not completely loaded,
do as follows:
System Damage
It takes a while to safely erase all memory banks of the sys-
tem.
After a shut-down wait at least ten seconds before
starting the system again.
Data Loss
The fast shut-down may not save all your system data and
personal settings before the system turns off.
Corrupted Data
Shutting down the system while frozen or not completely
loaded may lead to corrupted system data.
Use this procedure only if absolutely necessary.