Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 92 / 321

File and Data Management
R&S
®
AREG100A
92 User Manual 1178.7417.02 ─ 04
3. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 7.4, "Using
the Security Settings" , on page 113.
4. Select "Accept".
6.7.2 Accessing the File System of the R&S AREG100A Via ftp
If the R&S AREG100A is connected to a LAN, you can use file transfer protocol (ftp) to
access the file system and to transfer files from and to the instrument.
For information on how to set up a LAN connection, refer to:
●
Chapter 3.1.3, "Setting Up a Network (LAN) Connection" , on page 24
●
Chapter 8, "Network Operation and Remote Control" , on page 128
To access the file system via ftp
We assume that the instrument and the remote PC are connected to a LAN.
1. Enable file transfer via ftp
2. Enable write permission on the file system
3. On the remote PC, start the Windows Explorer.
4. In the address field, enter
ftp://<"IP Address" of the Instrument>
, e.g.
ftp://10.124.0.166 .
Tip: The R&S AREG100A indicates its IP address on the home screen.
A log-on dialog opens and requests a password.
The default user name and password is instrument .
Tip:
Default password
The FTP and SAMBA file access use the user "instrument" with default password
"instrument".
We recommend that you change this password in the "Setup > Security > Pass-
word Management > Change User Password" dialog before connecting the instru-
ment to the network.
See
Chapter 7.4.4, "Password Management" , on page 123.
5. Enter the password to access the
user
directory.
The
user
directory corresponds to the
/var/user/
directory of the instrument.
How to Transfer Files from and to the Instrument