Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 228 / 321

Remote Control Commands
R&S
®
AREG100A
228 User Manual 1178.7417.02 ─ 04
:SYSTem:COMMunicate:NETWork:IPADdress <IpAddress>
Sets the IP address.
Parameters:
<IpAddress> string
Range:
0.0.0.0. to ff.ff.ff.ff
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Manual operation: See "IP Address" on page 142
:SYSTem:COMMunicate:NETWork:IPADdress:MODE <Mode>
Selects manual or automatic setting of the IP address.
Parameters:
<Mode> AUTO | STATic
*RST:
n.a. (factory preset: AUTO)
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Example: SYSTem:COMMunicate:NETWork:IPADdress:MODE
STATic
SYSTem:COMMunicate:NETWork:IPADdress
"10.113.0.105"
Manual operation: See "Address Mode" on page 141
:SYSTem:COMMunicate:NETWork:MACaddress <MacAddress>
Queries the MAC address of the network adapter.
This is a password-protected function. Unlock the protection level 1 to access it.
Parameters:
<MacAddress> string
Example: See Example "Retrieving information on network-related set-
tings" on page 218.
Manual operation: See "MAC Address" on page 143
:SYSTem:COMMunicate:NETWork:RESource?
Queries the visa resource string for Ethernet instruments.
Return values:
<Resource> string
Example: See Example "Finding out the used VISA ressource strings"
on page 219.
SYSTem Subsystem