Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 139 / 321

Network Operation and Remote Control
R&S
®
AREG100A
139 User Manual 1178.7417.02 ─ 04
Protocol Remote control program
Socket rsareg_init ("TCPIP:AREG100A-102030::5025::SOCKET", ...)
rsareg_SetFrequency (..., 2e9)
GPIB rsareg_init ("GPIB::28::INSTR", ...)
rsareg_SetFrequency (..., 2e9)
8.4 Remote Access Settings
This section outlines the settings required for accessing and configuring the provided
remote control interfaces. It includes network settings, access addresses, emulation
settings for using the command sets of other generators, and the access via smart
devices.
About instrument emulations
You can also remotely control the R&S AREG100A via the command set of another
signal generator. With this function you can, for example, replace a signal generator
with an R&S
AREG100A in an automated test setup, without adjusting the command
scripts used.
You find all the remote control command sets supported by the R&S AREG100A in a
selection list.
The selected instrument also defines the identification string that is retrieved with query
*IDN?
. If necessary, use the parameter Mode and IDN String to change this string.
As any other parameter, the remote control command set can also be changed
remotely by the command
:SYSTem:LANGuage
.
While working in an emulation mode, the R&S AREG100A specific command set is
disabled and the SCPI command
:SYSTem:LANGuage
is discarded.
To return to the SCPI command set of the R&S AREG100A, use the appropriate com-
mand of the selected command set.
Remote Access Settings