R&S AM300
Setting Parameters
Operating manual, 02/2005
5-55
E-1007.9922.12
5.4.4
Entering Numerical Parameters
Introduction
When you select a menu, a number of instrument functions will be displayed
in the function area. If you press certain function keys, an entry field will be
displayed in the diagram area.
The function key you select is highlighted.
There are two ways of entering numerical parameters:
Entry
of a number with the
numerical keys
Entry
of a number with the
cursor keys
and
rotary knob
5.4.4.1
Entry with the Numerical Keys
e.
g.:
Frequency setting of
the current
waveform
( 6-75)
1.
Press the
function key
in the
menu
.
An entry field containing the current setting is displayed.
Entering
a new value
2.
Overwrite the old value, e.
g.
2.5 MHz,
with the
numerical keys
Note:
If a numerical key is pressed after the entry field is brought up on
the screen, the old value will be erased. However, a complete new value
must now be entered using the numerical keys.
Содержание AM 300
Страница 2: ...02 2005 ...
