Installed Software
R&S
®
SFE100
56
Getting Started 2112.4122.62 ─ 13
3. After the recovery, turn off/on the R&S
SFE100 manually.
10.3.3.4
Deleting Backups
On the recovery partition, you can store up to five backups in addition to the factory
default. To provide space for new backups, you may need to remove older backups.
The factory default cannot be deleted.
Only R&S
SFE100 models 12, 13.
1. In the "Windows
XP Embedded Recovery and Backup Partition" dialog (see
display the Windows XP Embedded Recovery and Backup Partition dialog"
on page 51), click "Remove Backup" to delete a selected backup.
The "Remove Backup" dialog is displayed. It shows the versions of the firmware
and the software platform of the selected backup.
2. Under "Select Backup", select the backup to be deleted.
3. Click "Remove".
After the deletion, the R&S
SFE100 returns to the "Remove Backup" dialog as long
as backups are still available. If the last backup is deleted, the "Windows
XP
Embedded Recovery and Backup Partition" dialog is displayed again.
4. Click "Cancel" to return the "Windows
XP Embedded Recovery and Backup Parti-
tion" dialog.
5. Click "Exit and Shutdown".
6. After the recovery, turn off/on the R&S
SFE100 manually.
Windows
XP Recovery and Backup Partition
