Sample Application
R&S
®
SFE100
41
Getting Started 2112.4122.62 ─ 13
7. Make sure that the "STUFFING" field in the work view is set to "ON".
This ensures that the incoming transport stream will be adapted to the proper data
rate of the coder. The data rate of the coder will depend on the transmission
parameters. The data stream is padded with null packets to allow adaptation to the
transmission parameters.
a) Select the "STUFFING" field.
b) Press the ENTER key to display the list.
c) Select "ON".
d) Press the ENTER key to confirm the selection.
8. Select "BACK" and press the ENTER key.
The focus is set to the tree.
9. In the tree, select the "CODING" submenu.
10. Press the ENTER key.
The focus is set on the work view.
11. Select a symbol rate of 6.9
.MS/s.
a) Select the "SYMBOL RATE" field.
b) Enter
6.9
.
c) If the units field to the right shows "MS/s", press the ENTER key.
d) If the units field indicates another unit, select this field. Press the ENTER key,
and select the "MS/s" unit. Press the ENTER key twice to confirm the unit and
the symbol rate.
The selected symbol rate is displayed in the info area.
12. Select the "64 QAM" constellation.
a) Select the "CONSTELLATION" field.
b) Press the ENTER key to display the list.
c) Select "64 QAM".
d) Press the ENTER key to confirm the selection.
The selected constellation is displayed in the info area.
8.1 Using Display and Keys on the Front Panel
A display and keys on the front panel are only provided by the R&S
SFE100 models 02
and 03.
For details on using the front panel display see the user manual or the help system.
Setting the output frequency
1. Press OK to enter tree operation.
Using Display and Keys on the Front Panel
