manualshive.com logo in svg

Rohde & Schwarz 1803.7000K04, Начало работы, Страница: 25 / 79

Поделиться
Скачать
Rohde & Schwarz 1803.7000K04 Скачать руководство пользователя страница 25

Preparing for use

R&S

®

RTP

25

Getting Started 1803.6478.02 ─ 01

When a USB device is disconnected from the R&S

 

RTP, Windows immediately

detects the change in hardware configuration and deactivates the corresponding
driver.

The properties of external USB devices are configured in the operating system,
not in the instrument's firmware. We recommended using mouse and keyboard to
access and modify the settings of the Windows operating system.

To access Windows, press the Windows key on the external keyboard, or select
"Menu" > "Minimize Application" on the R&S

 

RTP menu.

Connecting a keyboard or mouse

1. Connect the keyboard or mouse.

The device is detected automatically. The default input language of the key-
board is English – US.

2. To configure the keyboard properties, press the Windows key on the external

keyboard.

3. Tap the "Find" icon (magnifier) on the Windows taskbar.

4. To configure the keyboard:

a) Type 

keybord

.

b) Select "Edit language and keyboard options".

5. To configure the mouse:

a) Type 

mouse

.

b) Select "Mouse settings".

4.8.2

 

Connecting external monitors

You can connect one or two external monitors or projectors to the R&S

 

RTP. The

following connectors are available:

●

"HDMI"

 

on page 31

●

"DisplayPort"

 

on page 31

1. Ensure that the monitors and the R&S

 

RTP are connected to a ground con-

tact. Otherwise the instrument can be damaged.

2. Check the input type of the monitors. Make sure to select the correct cable. If

the connectors do not match, use an appropriate adapter.

Connecting external devices

Содержание 1803.7000K04
















































































Отзывы:

Нет отзывов