Rohde & Schwarz 1424.7805.02, Руководство пользователя

Страница: 41 / 522

Operating Concepts
R&S
®
NRX
41 User Manual 1178.5566.02 ─ 08
a) Tap the touchscreen.
b) Enter the security password.
Further information:
●
"Security Password to Unlock Settings" on page 157
4.2 Remote Operation
VNC (virtual network computing) simulates the user interface of the R&S NRX. Thus,
you can operate the R&S NRX manually from an external computer in the same way
as operating the R&S NRX itself. During VNC operation, local operation (manual oper-
ation, see
Chapter 4.1, "Manual Operation" , on page 31) and remote operation have
equal access rights. Both users see the same screen contents of the R&S NRX and
can operate the R&S NRX simultaneously.
By default, VNC access is enabled. Any user in the network who knows the password
and IP address of the R&S NRX can access the R&S NRX. To prevent access, disable
the VNC server service under
"VNC" on page 159.
Prerequisites
●
LAN interface of the external computer is configured for the network.
●
R&S NRX and the computer are connected using a LAN network.
To set up a connection using a VNC viewer
1. On the external computer, install the VNC viewer if it is not installed already.
2. Open the VNC viewer.
3. Enter the host name or the IP address of the R&S NRX.
See also "Overview tab" on page 139.
4. Click "Connect".
5. Enter the session password. For preconfigured password, see "Old Password"
on page 159.
To set up a connection using a web browser
1. Open the web browser.
2. Enter as web address: http://<hostname> or http://<IP address> . For example,
http://nrx-104711 .
See also "Overview tab" on page 139.
3. Enter the password. For preconfigured password, see "Old Password"
on page 159.
Shortcuts for the front panel keys
During remote operation, you can operate the keys on the front panel using shortcuts:
Remote Operation
www.allice.de Allice Messtechnik GmbH