Rohde & Schwarz 1424.7005K02, Начало работы

Страница: 21 / 34

Preparing for use
R&S
®
NRX
21 Getting Started 1424.7070.02 ─ 09
4.7.4 USB 2.0 host interfaces
See Chapter 5.1.5, "USB host interface" , on page 27 and Chapter 5.2.4, "USB
host interface" , on page 29.
Suitable for USB power sensors. You can increase the number of connected
power sensors by using USB hubs.
4.8 Connecting USB and external devices
Apart from connecting power sensors, you can use the USB interfaces to connect
USB devices. You can increase the number of connected devices by using USB
hubs.
Due to the large number of available USB devices, there is almost no limit to the
possible expansions. In the following, useful USB devices are listed exemplarily:
●
Memory stick for easy transfer of data to/from a computer (e.g. firmware
updates).
●
Mouse if you prefer this way of operation over a touchscreen.
4.9 Switching on or off
Table 4-1: Overview of power states
Status LED Position of power switch
Off Off [0]
Standby
orange
[I]
Ready
green
[I]
To switch on the product
The product is off but connected to power.
1. Set the switch on the power supply to position [I]. See Chapter 5.2.5, "AC sup-
ply and power switch" , on page 29.
The LED of the [standby] key is orange. See Chapter 5.1.6, "On/standby key" ,
on page 27.
Switching on or off