manualshive.com logo in svg

Rohde & Schwarz 1332.4500.22, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz 1332.4500.22 Скачать руководство пользователя страница 990

Command Reference

R&S

®

 ZNA

990

User Manual 1178.6462.02 ─ 12

Parameters:

<Boolean>

ON | OFF - logo is included or excluded.
*RST: 

n/a (*RST does not affect the printer configuration)

Example: 

HCOP:ITEM:ALL

Select the complete information to be printed.

HCOP:ITEM:LOGO ON; :HCOP

Include the logo in the printed output and start printing.

HCOPy:ITEM:MLISt[:STATe] 

<Boolean>

Qualifies whether or not the printed output contains the information in the marker info
field (marker list).

Parameters:

<Boolean>

ON | OFF - marker list is included or excluded.
*RST: 

n/a (*RST does not affect the printer configuration)

Example: 

HCOP:ITEM:ALL

Select the complete information to be printed.

HCOP:ITEM:MLISt ON; :HCOP

Include the marker list in the printed output and start printing.

HCOPy:ITEM:TIME[:STATe] 

<Boolean>

Qualifies whether or not the printed output contains the current date and time.

Parameters:

<Boolean>

ON | OFF - date and time is included or excluded.
*RST: 

n/a (*RST does not affect the printer configuration)

Example: 

HCOP:ITEM:ALL

Select the complete information to be printed.

HCOP:ITEM:TIME ON; :HCOP

Include the data and time in the printed output and start printing .

HCOPy:PAGE:COLor 

<ColorScheme>

Select the color scheme to be used for printing.

Parameters:

<ColorScheme>

UDEFined | DBACkground | LBACkground | BWLStyles |
BWSolid | PBWLstyles | PCLBackgrnd | ON | OFF
ON 

–

 print with color or grayscale (depending on the printer

capabilities).
OFF 

–

 use black-and-white printing using line styles to allow

identification of different traces.

UDEFined

User defined color scheme, previously configured using

DISPlay:CMAP:

* commands

SCPI Command Reference

Содержание 1332.4500.22





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды